6000 Series Aluminium Solid Round Bar

6000 Series Aluminium Tiileng Round Bar Featured Image
  • 6000 Series Aluminium Solid Round Bar
  • 6000 Series Aluminium Solid Round Bar
  • 6000 Series Aluminium Solid Round Bar

Tlhaloso e Khutšoanyane:

6000 letoto la aluminium melamu e emela hore 6061 le 6063 haholo-holo li na le likarolo tse peli, magnesium le silicon, kahoo melemo ea letoto la 4000 le letoto la 5000 li tsepamisitsoe.Ho sebetsa hantle, ho bonolo ho apara, le ho sebetsa hantle.


Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Tlhaloso ea Sehlahisoa

Lintho tse ka sehloohong tsa motsoako oa 6061 aluminium rod ke magnesium le silicon, 'me li theha Mg2Si phase.Haeba e na le palo e itseng ea manganese le chromium, e ka fokotsa liphello tse mpe tsa tšepe;ka linako tse ling palo e nyenyane ea koporo kapa zinki e kenngoa ho ntlafatsa matla a alloy ntle le ho fokotsa ho hanyetsa ha eona haholo;ho ntse ho e-na le lisebelisoa tse nyenyane tsa conductive.Koporo ho felisa litlamorao tse mpe tsa titanium le tšepe ho conductivity ea motlakase;zirconium kapa titanium e ka ntlafatsa lijo-thollo le ho laola sebopeho sa recrystallization;e le ho ntlafatsa machinability, lead le bismuth li ka eketsoa.6061-T651 ke motsoako o ka sehloohong oa li-alloy tse 6, 'me ke sehlahisoa sa boleng bo holimo sa aluminium se kileng sa etsoa kalafo ea mocheso le ho otlolla pele.Le hoja matla a eona a ke ke a bapisoa le lihlopha tsa 2XXX le lihlopha tsa 7XXX, li-alloys tsa eona tsa magnesium le silicon li na le litšobotsi tse ngata le ts'ebetso e babatsehang ea ts'ebetso e babatsehang, litšoaneleho tse babatsehang tsa ho tjheseletsa le electroplating, ho hanyetsa kutu e ntle, boima bo phahameng le ho se be le deformation ka mor'a ho sebetsa, thepa e teteaneng ntle le mefokolo. e bonolo ho bentša, filimi e mebala e bonolo, phello e ntle ea oxidation le litšobotsi tse ling tse babatsehang.

6063 aluminium rod ke alloy e tlase ea Al-Mg-Si series high plasticity alloy.E na le likarolo tse ngata tsa bohlokoa:

1. E matlafalitsoe ke phekolo ea mocheso, boima bo phahameng ba tšusumetso, 'me ha e na kutloelo-bohloko ho sieo.

2. Ka thermoplasticity e ntle haholo, e ka fetisetsoa ka lebelo le phahameng ka har'a li-profiles tse rarahaneng, tse tšesaane le tse se nang letho kapa tsa qhekelloa ka har'a liforomo tse nang le sebopeho se rarahaneng, mocheso o pharalletseng o timang mocheso, kutlo e tlase ea quenching, ka mor'a extrusion le forging demoulding, ha feela mocheso o le mocheso. e phahame hofeta mocheso o timang.E ka tima ka ho fafatsa ka metsi kapa ho kenella ka metsi.Likarolo tse nang le marako a tšesaane (6<3mm) le tsona li ka tima moea.

3. Ts'ebetso e ntle ea tjheseletsa le ho hanyetsa kutu, ha ho na tšekamelo ea ho senya khatello ea maikutlo.Har'a lisebelisoa tsa aluminium tse matlafalitsoeng ka mocheso, li-alloys tsa Al-Mg-Si ke tsona feela li-alloys tse sa kang tsa fumana khatello ea khatello ea maikutlo.

4. Bokaholimo ka mor'a ts'ebetso bo boreleli haholo ebile bo bonolo ho anodize le mmala.

Sebopeho sa lik'hemik'hale le thepa ea mechine ea 6061 aluminium rod

Al

Si

Cu

Mg

Zn

Mn

Cr

Fe

Ti

Allowance

0.4-0.8

0.15-0.4

0.8-1.2

0.25

0.15

0.04-0.35

0.7

0.15

 

Matla a tsitsitseng σb ≥180MPa
Matla a ho hlahisa σ0.2 ≥110MPa
Elongation δ5 (%) ≥14
Elasticity coefficient 68.9 GPA
Matla a ho qetela a ho kobeha 228 MPa
Ho Fana ka Matla 103 MPa
Matla a mokhathala 62.1 MPa
Boholo ba mohlala bophara: ≤150

Sebopeho sa lik'hemik'hale le thepa ea mechine ea 6063 aluminium rod

Al

Si

Cu

Mg

Zn

Mn

Cr

Fe

Ti

Allowance

0.2-0.6

0.1

0.45-0.9

0.1

0.1

0.1

0.35

0.1

 

Tensile matla σb (MPa) 130-230
Matla a ho qetela a matla a 6063 124 MPa
Tensile e fana ka matla 55.2 MPa
Elongation 25.0 %
Elasticity coefficient 68.9 GPA
Ho Fana ka Matla 103 MPa
Karolelano ea Poisson 0.330
Matla a mokhathala 62.1 MPa
  • E fetileng:
  • E 'ngoe:

    • LIHLAHISO TSE HLAHANG