Tlhaloso ea Sehlahisoa
5052 aluminium rod ke letoto la AL-Mg, e leng aluminium e khahlanong le mafome e sebelisoang haholo.Alloy ena e na le matla a phahameng, haholo-holo ho hanyetsa mokhathala: polasetiki e phahameng le ho hanyetsa kutu, 'me e ke ke ea matlafatsoa ke phekolo ea mocheso.Plastiki e ntle, polasetiki e tlase nakong ea ho thatafala ha mosebetsi o batang, ho hanyetsa kutu e ntle, ho cheseha hantle, ho se sebetse hantle, le ho belisoa.Lithupa tsa aluminium tsa 5052 li sebelisoa haholo bakeng sa likarolo tse boima bo tlase tse hlokang polasetiki e phahameng le ho cheseha hantle, 'me li sebetsa mecheng ea metsi kapa ea khase, joalo ka mabokose a poso, peterole kapa li-conduits tsa oli tse tlotsang, lijana tse fapaneng tsa mokelikeli le likarolo tse ling tse nyane tse entsoeng ka ho taka ka botebo.Likarolo tse kentsoeng: Mohala o sebelisoa ho etsa li-rivets.E boetse e sebelisoa hangata likarolong tsa tšepe tsa likoloi tsa lipalangoang le likepe, lisebelisoa, li-brackets tsa mabone a seterateng le li-rivets, lihlahisoa tsa hardware, lisebelisoa tsa motlakase, joalo-joalo.
5083 aluminium rod ke ea Al-Mg-Si alloy, e sebelisoang haholo, haholo-holo indasteri ea kaho e ke ke ea etsa ntle le motsoako ona, 'me ke motsoako o tšepisang ka ho fetisisa.Ho hanyetsa kutu e ntle, ho chesehela hantle, ho sebetsa hantle ha serame, le matla a itekanetseng.Ntho e ka sehloohong ea alloying ea 5083 ke magnesium, e nang le sebopeho se setle, ho hanyetsa kutu, ho chesoa, le matla a mahareng.Lihlahisoa tsa Hardware, liphaello tsa motlakase, joalo-joalo.
Sebopeho sa lik'hemik'hale le thepa ea mechine ea 5052 aluminium rod
| Al | Si | Cu | Mg | Zn | Mn | Cr | Fe |
| Allowance | ≤0.25 | ≤0.10 | 2.2~2.8 | ≤0.10 | ≤0.10 | 0.15–0.35 | ≤0.40 |
| Matla a tsitsitseng (σb) | 170 ~ 305MPa |
| Matla a tlhahiso ea maemo | σ0.2(MPa)≥65 |
| Modulase wa letlapa (E) | 69.3-70.7Gpa |
| Anealing mocheso | 345°C. |
Sebopeho sa lik'hemik'hale le thepa ea mechine ea 5083 aluminium rod
| Al | Si | Cu | Mg | Zn | Mn | Cr | Fe | Ti |
| Allowance | 0.4 | 0.1 | 4.0--4.9 | 0.25 | 0.40--0.10 | 0.05--0.25 | 0.4 | 0.15 |
| Tensile matla σb (MPa) | 110-136 |
| Elongation δ10 (%) | ≥20 |
| Anealing mocheso | 415°C. |
| Yield strength σs (MPa) | ≥110 |
| Setšoantšo se se nang letho le Botenya bohle ba Wall | |
| Elongation δ5 (%) | ≥12 |
