Tlhaloso ea Sehlahisoa
3003 ke motsoako oa AL-Mn, e leng aluminium e thibelang mafome e sebelisoang haholo.Matla a alloy ena ha a phahame ebile a ke ke a matlafatsoa ke phekolo ea mocheso.Ka hona, mokhoa o batang oa ho sebetsa o sebelisoa ho ntlafatsa thepa ea oona ea mechine: e na le polasetiki e phahameng ea boemo ba annealed., Mosebetsing o sa batang o thata, polasetiki e ntse e le ntle, 'me mosebetsi o batang o thata o fokotsehile ka polasetiki, khanyetso e ntle ea kutu, ho cheseha hantle, le machinability e fokolang.Haholo-holo e sebelisetsoa likarolo tse tlaase tse hlokang polasetiki e phahameng le ho chesehela hantle, ho sebetsa sebakeng sa metsi kapa sa khase, joalo ka litanka tsa mafura, peterole kapa li-conduits tsa oli tse tlotsang, lijana tse fapaneng tsa metsi le likarolo tse ling tse nyenyane tse entsoeng ka setšoantšo se tebileng: Wire e sebelisoa. ho etsa li-rivets.
Ho hanyetsa kutu ea 3003 aluminium alloy e ntle haholo, e haufi le ho hanyetsa ha kutu ea aluminium e hloekileng ea indasteri, 'me e na le khanyetso e ntle ea kutu ho sepakapaka, metsi a hloekileng, metsi a leoatle, lijo, organic acid, peterole, tharollo ea letsoai e sa nke lehlakore, joalo-joalo. khanyetso e boetse e ntle haholo.
Molamu oa 3A21 oa aluminium ke oa motsoako oa aluminium o thata le motsoako oa aluminium o entsoeng ho latela sebopeho.Ha ho bapisoa le 23A21, ka lebaka la boleng bo phahameng ba koporo, matla a phahame 'me matla a mocheso a molemo, empa polasetiki e boemong bo chesang ha e tšoane le ea 3A21., 3A21 aluminium alloy e na le machinability e ntle, welding e ntle ea khokahano, welding ea matheba le ts'ebetso ea rolling, welding ea arc le ts'ebetso e mpe ea khase;phekolo ea mocheso e ka matlafatsoa, ho na le phello ea extrusion.
3003 aluminium rod sebopeho sa lik'hemik'hale le thepa ea mochini
| Al | Si | Cu | Mg | Zn | Mn | Ti | Ni | Fe+Ni | Fe |
| 余量 | ≤0.60 | 0.05-0.20 | --- | ≤0.10 | 1.00-1.50 | --- | --- | --- | ≤0.70 |
| TensileStrength(Mpa) | 140-180 |
| yield strength(Mpa) | ≥115 |
| EL(%) | ≤2% |
| Boima ba 'mele(g/cm³) | 2.75 |
Sebopeho sa lik'hemik'hale le thepa ea mechine ea 3A21 aluminium rod
| Al | Si | Cu | Mg | Zn | Mn | Ti | Ni | Ti+Zr | Fe |
| moeling | ≤0.60 | ≤0.20 | ≤0.50 | ≤0.10 | 1.00-1.60 | ≤0.15 | --- | ≤0.20 | ≤0.70 |
| TensileStrength(Mpa) | 140-180 |
| yield strength(Mpa) | ≥115 |
| EL(%) | ≤2% |
| Boima ba 'mele(g/cm³) | 2.75 |
