304 Stainless Steel Round Rod Bar.Tshipe e pota-potileng e bua ka tšepe e tiileng e telele e nang le karolo e pota-potileng.Lisebelisoa tsa tšepe tse pota-potileng ka kakaretso li entsoe ka tšepe ea pele, e nang le polasetiki e ntle haholo.E sebelisoa ka bongata indastering mme e sebelisoa hanyane mererong ea kaho.Litlhaloso tsa litšepe tsa tšepe tse pota-potileng li hlahisoa haholo-holo ka limilimithara tsa bophara ba limilimithara, mohlala, "50" e bolela tšepe e pota-potileng e nang le bophara ba 50 mm. Tšepe e pota-potileng e arotsoe ho latela mokhoa oa tlhahiso: e arotsoe ka mefuta e meraro: e chesang. ho bidika, ho qapa le ho taka.Mokhoa oa ho sebetsana le khatello eo karolo ea sefapano sa thepa e fokotsoang 'me bolelele bo eketseha, e leng mokhoa o tloaelehileng oa tlhahiso ea ho hlahisa tšepe, haholo-holo o sebelisetsoa ho hlahisa litlaleho, lipoleiti le liphaephe.E arotsoe ka ho chesa-role le ho bata.Boholo ba bar e chitja e chesang ke 5.5-250 mm.Har'a tsona: mekoallo e nyenyane e pota-potileng ea 5.5-25 mm e fanoa ka bongata ka mekotla ea lihlopha tse otlolohileng, tse atisang ho sebelisoa e le litšepe tsa tšepe, liboutu le likarolo tse sa tšoaneng tsa mechine mererong ea kaho;mekoallo e chitja e kholo ho feta 25 mm e sebelisoa haholo bakeng sa ho etsa likarolo tsa mochini kapa lisebelisoa tse tala tsa phala ea tšepe.
| Lebitso la Sehlahiswa | 304 Stainless Steel Round Bar |
| Standard | 304 |
| Lintho tse bonahalang | Q195,Q235, 10#,20#,35#,45#,Q215,Q345,12Cr1Mov,15CrMo,304,316,321,20Cr,40Cr,20CrMo,35CrMo,42CrMo,40CrNiCr5,M5,M5, 40CrNi,M5, 6M5, 5, 42CrMo, 40CrNiM5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 35CrMo, 5, 5, 5, 5, 35 CrMov 3Cr2W8V, 20CrMnTi, 5CrMnMo, joalo-joalo.
|
| Thekenoloji | E Hōlehileng e Chesang, E Fepiloe 'me e Bata |
| Mamello | Laola ka maemo, OD:+/-1%, WT:+/-5% |
| Kopo | Libaka tse nyenyane tse pota-potileng tsa 5.5-25 limilimithara li fanoa haholo ka mekotla ea lihlopha tse otlolohileng, 'me hangata li sebelisoa e le litšepe tsa tšepe, liboutu le likarolo tse sa tšoaneng tsa mechine;mekoallo e pota-potileng e kholo ho feta 25 mm e sebelisoa haholo bakeng sa ho etsa likarolo tsa mochini, liphaephe tsa liphaephe tsa tšepe tse se nang moeli, joalo-joalo.
|
| Melao ea Tefo | 1.FOB 30% T / T, 70% Pele ho romelloa 2.CIF 30% Pre-payment , Balance e tlameha ho lefshoa pele ho romelloa 3.Irrevocable 100% L / C ha u bona |
| Tlhahlobo ea Mokha oa Boraro | SGS, BV, MTC |
| Melemo | 1. Nako e khutšoanyane ea ho fana 2.Tiiso ea boleng 3.Theko ea tlhōlisano, 4.Free Sample |
| Nako ea thomello | Nakong ea matsatsi a 25 ka mor'a ho fumana tefo ea pele |
| K'hemik'hale NTS'OANE | ||||||||
| Kereiti | C | Si | Mn | P | S | Ni | Cr | Mo |
| 201 | ≤0.15 | ≤0.75 | 5.5-7.5 | ≤0.06 | ≤0.03 | 3.5-5.5 | 16.0-18.0 | - |
| 202 | ≤0.15 | ≤1.0 | 7.5-10.0 | ≤0.06 | ≤0.03 | 4.-6.0 | 17.0-19.0 | - |
| 301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 6.0-8.0 | 16.0-18.0 | - |
| 302 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 8.0-10.0 | 17.0-19.0 | - |
| 304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 8.0-10.5 | 18.0-20.0 | |
| 304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 9.0-13.0 | 18.0-20.0 | |
| 309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 12.0-15.0 | 22.0-24.0 | |
| 310S | ≤0.08 | ≤1.5 | ≤2.0 | ≤0.035 | ≤0.03 | 19.0-22.0 | 24.0-26.0 | |
| 316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 10.0-14.0 | 16.0-18.0 | 2.0-3.0 |
| 316L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 12.0-15.0 | 16.0-18.0 | 2.0-3.0 |
| 321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 9.0-13.0 | 17.0-19.0 | - |
| 904L | ≤2.0 | ≤0.045 | ≤1.0 | ≤0.035 | - | 23.0-28.0 | 19.0-23.0 | 4.0-5.0 |
| 2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.030 | ≤0.02 | 4.5-6.5 | 22.0-23.0 | 3.0-3.5 |
| 2507 | ≤0.03 | ≤0.80 | ≤1.2 | ≤0.035 | ≤0.02 | 6.0-8.0 | 24.0-26.0 | 3.0-5.0 |
| 2520 | ≤0.08 | ≤1.5 | ≤2.0 | ≤0.045 | ≤0.03 | 0.19-0.22 | 0.24-0.26 | - |
| 410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | - | 11.5-13,5 | - |
| 430 | 0.12 | ≤0.75 | ≤1.0 | ≤0.040 | ≤0.03 | ≤0.60 | 16.0-18.0 | - |
Tšepe e chitja haholo-holo e kenyelletsa tšepe e chitja e se nang tšepe le tšepe e chitja ea carbon:
1. Ho ea ka ts'ebetso, tšepe e chitja e arotsoe ka mefuta e meraro: ho chesa ho chesa, ho forging le ho taka ho bata.Litlhaloso tsa mekoallo e pota-potileng e chesang ke 5.5-250 mm, eo, mekoallo e nyenyane e pota-potileng ea 5.5-25 mm e fanoa haholo ka mekotla ea lihlopha tse otlolohileng, tse atisang ho sebelisoa e le litšepe tsa tšepe, liboutu le likarolo tse sa tšoaneng tsa mechine;mekoallo e pota-potileng e kholo ho feta 25 mm ke haholo-holo Bakeng sa ho etsa likarolo tsa mochine, likheo tsa li-tube bakeng sa li-tubes tsa tšepe tse se nang moeli, joalo-joalo.
2. Ho ea ka sebopeho sa lik'hemik'hale, tšepe e chitja ea carbon steel (ke hore, ho ea ka carbon content) e ka aroloa ka tšepe e tlaase ea carbon, tšepe e bohareng ea carbon le carbon steel e phahameng.
3. Ho ea ka boleng ba tšepe, tšepe e chitja e ka aroloa ka tšepe e tloaelehileng ea carbon le boleng bo phahameng ba carbon steel.
4. Ho ea ka morero, tšepe e chitja e ka aroloa ka tšepe ea sebopeho sa carbon le tšepe ea lisebelisoa tsa carbon.
Tšepe e pota-potileng e arotsoe ho ea ka mokhoa oa tlhahiso: e arotsoe ka mefuta e meraro: ho chesa ho chesang, ho qhekella le ho taka ho batang.
Ho chesa tšepe e pota-potileng ke mokhoa oa ho sebetsana le khatello eo billet ea tšepe e fetisetsoang ho eona ka meqolo e pota-potileng (libopeho tse sa tšoaneng), 'me karolo ea thepa e fokotsehile' me bolelele bo eketseha ka lebaka la ho hatelloa ha ho etsoa le ho roala ha meqolo.Ena ke mokhoa o sebelisoang ka ho fetisisa oa tlhahiso bakeng sa tlhahiso ea tšepe.E sebelisoa haholo-holo ho hlahisa li-profile, lipoleiti le liphaephe.
Tšepe e pota-potileng e entsoeng: e bolela tšepe e chitja e ka bōptjoang ka ho fereka.Ka kakaretso, boleng ba tšepe e chitja e hlahisoang ke mokhoa oa ho roala mahala o molemo tlas'a maemo a karo-karolelano e tšoanang ea deformation, hobane ho qhekella ho fihlela palo e lekanang ea deformation ea rolling ho hloka hore ho qhekelloe khafetsa ho lelefatsa (ho forging ke deformation ea mahala le ho e phutholla. ke constrained deformation), kahoo billet tšoanang hlahisa e tšoanang qeta ho pota tšepe forging ke lekana le ho eketseha ha deformation karo-karolelano ea rolling ka ho feta 50%.Ho phaella moo, ka kakaretso, ho qhekella ke ho senyeha ha tšepe ka kakaretso ho tloha holimo ho ea ka hare 'me sebaka se pota-potileng se holofetse pele, kahoo Sebopeho sa ka hare, tekanyo ea khethollo, mohala oa phallo ea tšepe, joalo-joalo ea mekoallo e chitja e hlahisoang ke tse peli. li fapane ka ho feletseng, 'me boleng ba mekoallo e pota-potileng ka kakaretso e molemo ho feta ea mekoallo e chitja.Ka hona, likarolo tsa bohlokoa tse kang lihlooho tsa crane hook li tlameha ho ba likarolo tse entsoeng.
Tšepe e chitja e huloang ke serame: e tsejoang hape ka hore ke tšepe e chitja e huloang ke serame, tšepe e huloang ke serame, tšepe e chitja e huloang ke serame, le tšepe e chitja e boreleli, ke mofuta oa tšepe ea karolo e huloang ke serame.Ebang ke tšepe e chitja e huloang ke serame kapa tšepe e chitja, sebōpeho sa eona se chitja, empa bokaholimo ba tšepe e chitja e huloang ke serame bo boreleli haholo, ho nepahala ha eona ho phahame, ’me thepa ea eona ea mochine e phahame.Ka lebaka la ho nepahala ha eona ho phahameng, e ka sebelisoa ka ho toba ntle le ho sebetsa.
Round steel e na le tebello e pharaletseng ea ts'ebeliso 'me e sebelisoa haholo ho hardware, kaho, likoloi, kaho ea likepe, lik'hemik'hale tsa petrole, mechine, meriana, lijo, motlakase, matla, sefofane, joalo-joalo, mokhabiso oa mohaho.Ts'ebetso e pharaletseng ka ho fetesisa ea likarolo tse tloaelehileng tsa mochini, likarolo tsa tšepe tse akaretsang, lithupa tsa CD, liboutu, linate.
| Sephutheloana | Pakete e tloaelehileng ea ho romelloa ka leoatleng, mefuta e meng ea ho paka e ka hlophisoa joalo ka tlhoko e 'ngoe le e 'ngoe. |
| Sephutheloana sa thepa | E phuthetsoe ka marapo a tšepe a tiileng, a bonolo ho kenya le ho laolloa. |
P: Na u moetsi?
A: E, re baetsi ba li-Steel Round Bars, Re na le feme ea rona, e Shandong, China.Re na le matla a ka sehloohong a ho hlahisa le ho romela lihlahisoa tse fapaneng tsa tšepe.Re tšepisa hore re seo u se batlang.
P: Na re ka etela feme ea hau?
A: Kea u amohela ka mofuthu hang ha re e-na le kemiso ea hau, re tla u lata.
P: O na le taolo ea boleng?
A: E, re ka amohela BV, SGS tlhahlobo ea boraro .
P: O ka hlophisa thomello?
A: Ehlile, re na le morekisi oa thepa oa ka ho sa feleng ea ka fumanang theko e ntle ho tsoa ho lik'hamphani tse ngata tsa likepe mme a fana ka litšebeletso tsa litsebi.
P: Nako ea hau ea ho fana ka nako e kae?
A: Ka kakaretso ke matsatsi a 7-14 haeba thepa e le teng.kapa ke matsatsi a 25-35 haeba thepa e le sieo, ho latela bongata.
P: Re ka fumana tlhahiso joang?
A: Ka kopo fana ka litlhaloso tsa sehlahisoa, joalo ka thepa, boholo, sebōpeho, joalo-joalo. Kahoo re ka fana ka tlhahiso e ntle ka ho fetisisa.
Q:Na re ka fumana disampole?
A: E, u ka fumana lisampole tse fumanehang setokong sa rona. Mahala bakeng sa disampole tsa 'nete, empa bareki ba hloka ho lefa litšenyehelo tsa thepa.
P: U etsa joang hore khoebo ea rona e be ea nako e telele le kamano e ntle?
A: 1.Re boloka boleng bo botle le theko ea tlhōlisano ho netefatsa hore bareki ba rona ba rua molemo.
2.Re hlompha moreki e mong le e mong e le motsoalle oa rona mme re etsa khoebo ka tieo le ho etsa setsoalle le bona, ho sa tsotellehe hore na ba tsoa hokae.
